Skip to content
Kipling Heights Locksmith ServicesRequest a visit
Open 24/7(289) 804-8591Call now
Detached horizontal exit device and separate strike component on a workshop bench. — Panic & Exit Hardware, Kipling Heights

Plan ahead Commercial · Kipling Heights

Panic & Exit Hardware in Kipling Heights

A padlock went on the stockroom's back door years ago for security and nobody has thought about it since, until the walkthrough this week pointed out that the same door is the room's only other way out.

Call now · open 24/7(289) 804-8591

Request a visit

In plain words

A code trigger usually starts the conversation: an occupant load over a threshold, a fire inspector's note, or a new use for a room that used to hold far fewer people. From there the visit works out which openings are affected, what device and trim suit each one, and whether a pair of doors needs a coordinator or a mullion removed. The installation follows a template, and every device is tested for release force and full latch engagement before the visit ends, with a written record of what went on the door for anyone reviewing the space afterward.

Sound familiar?

Two doors used to swing as a pair at the community hall entrance, but one leaf has started closing before the other, catching the astragal and leaving a gap wide enough to worry the caretaker.

How the visit goes

Panic & Exit Hardware · Kipling Heights

How the visit goes

Technician kneeling with a yellow cordless drill at the latch plate of a black door, a tool bag on the porch. — Kipling Heights
  1. 1

    Occupancy, fire rating and the authority reviewing the space

    The assessment records the occupancy type and calculated occupant load for the room the door serves, whether the door sits in a fire separation, and who the authority having jurisdiction is likely to be, whether that is a fire inspector, a building official or an insurer. These facts, not the door's appearance or its width alone, are what decide whether a releasing device is required, whether it must also be fire-rated exit hardware, and what documentation the finished installation should carry.

  2. 2

    Recording what was fitted

    The visit closes with a written account of the work: which device went on which door, its type and rating, the outside trim fitted, any electrified function added, and the tests the assembly passed. This record travels with the building rather than staying in the locksmith's memory, so a fire inspector, an insurer or a new manager reviewing the space later has a clear account of the exit hardware and when it was fitted.

  3. 3

    A door that opens under one motion, every time

    What the space has afterward is straightforward: anyone inside can leave through that door with a single push on the crossbar or touchpad, no key, no second step, no need to remember which way a lock turns. Staff can be shown the motion once and it stays intuitive, because that is exactly what the hardware is built to do. Outside, entry still works the way it was set up to, through the trim chosen for that door, entirely separate from the exit function inside.

In the van

  • Door closer
  • Request-to-exit switch
  • Strike and reinforcement
  • Coordinator for door pairs
  • Rated exit device

What affects the quote

  1. 1

    Door and frame condition

    A door that has sagged, a frame that has shifted, or a strike pocket that no longer lines up needs correcting before hardware is fitted, which adds its own line to the quote.

  2. 2

    Device family required

    A rim device suits many single doors with modest work. A mortise or vertical-rod device, or hardware built to a fire-exit listing, takes more preparation and generally more hardware, which the quote reflects.

  3. 3

    Condition of the existing hardware

    A device that only needs adjustment, cleaning and new fasteners costs less in labour than removing a seized or badly worn device and fitting a replacement in its place.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 804-8591

Panic & Exit Hardware: questions

Advice · (289) 804-8591

What is dogging, and can every door have it?

Dogging holds the device's latch retracted so the door works as a simple push-pull for a period, useful during business hours on a busy entrance. It is not available on fire-rated openings, because a fire door must keep an active latch at all times; on those doors, electric latch retraction achieves a similar push-pull convenience without ever leaving the latch mechanically held back.

What counts as panic hardware?

Panic hardware is a door-latching device, usually a crossbar or touchpad running most of the door's width, that releases the latch the moment someone pushes on it from the inside. It is built and tested so a light, even push anywhere along the bar opens the door, which is why it is chosen for doors serving rooms with enough people that fumbling for a key during an exit is not acceptable.

Can a padlock or extra deadbolt stay on a door that has this hardware?

No additional fastening should stay on an exit door that does not release the same way the primary device does. A hasp, padlock or separate deadbolt added at some point for extra security is a common finding on an older door, and removing or replacing it with something that releases under the same push is part of bringing that opening back to a single, reliable exit.

Toronto, Ontario

Kipling Heights information

Town
Kipling Heights, Toronto, Ontario
In business
22 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

58%

Older homes. About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

Where most homes were built decades ago, doors often still carry their original mortise locks and brass knobs. That hardware can usually be cleaned, re-sprung and kept in service, with a modern deadbolt added above it for strength without losing the look.

23%

Single-detached houses make up about 23% of homes in Toronto (2021 Census).

In a building, a lockout happens in a hallway rather than a porch, and the neighbours notice. A locksmith confirms you belong to the suite, opens the door with the least fuss the lock allows, and leaves the door and cylinder intact for the night.

Source: Statistics Canada, 2021 Census of Population

Open Kipling Heights in Google Maps

Open 24/7

Request a visit

A padlock went on the stockroom's back door years ago for security and nobody has thought about it since, until the walkthrough this week pointed out that the same door is the room's only other way…

Call now · open 24/7(289) 804-8591
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 22 years in business